Formulating Industry Standard Footwear And Clothing Industry From "Obedient" To "Speaking"

< < p > < < a href= > http://sjfzxm.com/news/index_s.asp > < < /a > > the office of Ding Junqin, vice chairman of the enterprise group, http://sjfzxm.com/news/index_s.asp, the investment zone enterprise. A thin "skateboard shoes" industry standard has become the most valuable report card he has received for more than 10 years.

From 90s of last century, it has been involved in footwear production. It has been officially designated as a professional shoe maker since 2000. It has been struggling for more than 10 years in the shoe industry.

< /p >

< p > "skateboard shoes have always been used as a branch of sports shoes. Previous reference standards are all sports shoes industry standards, but in fact, they are very different in professional wear."

Ding Junqin took out a pair of starlings' shoes, demonstrating that the biggest difference between professional skateboard shoes and sneakers is that they not only have wear-resisting and folding resistance for soles, but also put forward corresponding high requirements for shoes and walls.

However, due to the lack of a relatively uniform industry standard, the skateboard shoes market has mixed products.

< /p >

"P" is also beset with stark board shoes, as well as textile machinery enterprises.

"In fact, textile machinery industry standards have been available since 1991.

But in the past few years, technology has not been updated for many times, but the standard has been used more than 20 years ago.

Ni Ronglin, chief executive of Pml Precision Mechanism Ltd, admitted that the old standards had no practical reference value.

< /p >

< p > > a href= "http://sjfzxm.com/news/index_x.asp" > embarrassment < /a > is that the old standard has "blocked" a lot of independent technology research and innovation enterprises.

< /p >

< p > 1997, Kim Tissot developed a high-speed knitting machine using local parts after 5 years of experiments.

Ni Ronglin said, "according to the national standards at that time, the gap between the needle and the knitting cam is 5 wire, which is equivalent to 2/3 of the hair, and the data I reported is 15 to 25 silk, which is 3 to 4 times the national standard. It is considered that my machine is not accurate.

Because at that time textile machinery production technology was relatively backward, and we all did not understand it very well. We changed it into 5 silk according to national standards, and the result was that the machine could not turn around.

In the end, it was found that the national standard was formulated according to the low speed knitting machine with 10 revolutions / minutes, and the machine of the enterprise reached 25 to 30 rpm. The former could produce 10 kilograms of cloth in 1 days, and the latter could reach 400 to 500 kilograms.

In fact, it is a problem of speed and heat expansion, but the enterprises that block it are far more than Jin Tian soo.

< /p >

< p > textile machinery industry 8 standards, Jintian shuttle will get 3 of the "right of speech", including the standard of single side knitting machine, double faced knitting machine standard and national textile equipment engineering installation standard. For Ni Rong Lin, this is not only a glory, but also a chance to show strength to customers.

< /p >

Ni Ronglin, who has just attended the 2014 China International Textile Machinery Exhibition, brought back orders from the exhibition site. "This time with the important technical breakthrough of the upper and lower computer jacquard duplex machine exhibitors, it has made a good response." P

Ni Ronglin introduced that on the basis of the ordinary double-sided computer jacquard machine, a set of needle selection devices were installed on the needle plate to realize the jacquard weaving of the needle plate and the syringe. The two sides of the fabric can be woven according to the design requirements, especially when weaving the multicolored jacquard interlayer fabric, it can effectively avoid the unsmooth weaving caused by the overflowing of the ordinary jacquard knitting machine, and at the same time, the fabric is more plump.

It is understood that the jacquard machine is currently priced at 58 thousand euros, equivalent to about 600 thousand yuan, while the same production capacity of imported equipment priced at about 200 thousand euros, the price difference of nearly 4 times.

Enterprises with high cost performance and independent research and development capabilities are very popular at the exhibition.

< /p >

< p > the starlings of the "commanding heights" of the market, which have also been established by rules, already have the leveraging of the industry's "discourse power" in the new market.

< /p >

< < p > 2010, drafting the standard of skateboard shoes has undergone nearly ten revisions and audits, and has standardized four parts of the development, manufacture, production and sale of skateboard shoes.

"In China's domestic shoe brand, young people have a high degree of awareness of the eight stark shoes."

With the development of the industry standard of skateboard industry, Starling wants to further spread its technological strength through the Internet, and eventually realize the pformation of the business mode of online professional customization and offline store delivery.

< /p >

< p > Ding Junqin introduced that at present, the company has established an independent electricity supplier company, and has more than 40 people's R & D team strength and more than 10 people's design strength. "We strive to take out the board shoes in the end of 2015, and make innovations in technology and marketing."

He is full of confidence.

< /p >