Talking About The Technical Advantages Of Automatic Printing Machine

First, under the current situation of unstable workers, fully automatic Printing machine It highlights the great advantage of less labor and stable quality. When there are enough workers, three people can operate, one person can lay the sheet, one person can uncover the sheet, and one person can add slurry. When there are not enough workers, the full-automatic printing machine can merge the time spent in uncovering into the time spent in spreading, so that the spreading and uncovering can be operated at the same end. Therefore, this full-automatic oval printing machine can be operated by two people.

Second, the automatic printing machine is extremely power saving. Because we adopt private server control, the energy-saving and safe whole machine consumes 4.5KW of power (six colors as an example). The dryer uses IR type flash drying lamp tubes. How many pieces are printed will generate electricity charges, and the drying time only takes a few seconds to dry the surface. For different sizes, printing areas, graphics, etc., the number and power of the lamp tubes can be controlled at will. Achieve energy-saving effect and save every penny for enterprises.

The third is safety and reliability. In the whole printing machine, all other electrical appliances are 24 volts except for 380 volts for electricity and machine drying. The standard safe voltage of our body is 36 volts, and 24 volts is absolutely safe for workers. The 380 V motor can be directly grounded to ensure its safety. In addition, in the corresponding part of the full-automatic printing machine, the machine is installed with a safety control switch. During the operation of the machine, if it exceeds the setting range, the machine will automatically stop. The machine can only be started and operated normally until the fault is eliminated.

Fourth, it is convenient to load and unload printing plates. Since the manufacturer of the printing machine has absorbed the experience of many printing plants after using the machine, he knows what the printing plant requires for the plate loading and unloading of the full-automatic printing machine when manufacturing the machine. They require convenient loading and unloading of printing plates without affecting them printing Accuracy. Therefore, according to the requirements of the printing factory, this machine adopts the method of positioning the two ends of the printing plate and positioning the upper and lower three points, which is the same as manual printing. You only need to place the printing plate in a fixed position according to the method set by the machine, and fix the four corners of the printing plate with four bolts. It is also convenient to unload the printing plate. You only need to loosen the four bolts and remove the printing plate. The next printing does not need to re align the plate, which is convenient to operate.

The fifth is the scraping and ink returning of the scraper. The pressure of the scraper can be adjusted at will. In consideration of the large investment in purchasing a large full-automatic printing machine, the pressure of its scraper cannot be adjusted at will, and only thick lines can be printed spin Products. If fine lines are required to be printed, the machine cannot be used or the use effect is poor. Therefore, this machine has greatly improved the scraper frame and cylinder, and has made great efforts. Now this full-automatic printing machine can not only make the scraping and ink returning of the scraper obvious, but also make the pressure of the scraper adjusted at will. When printing on thick line textiles, we reduce the pressure of the scraper to increase the amount of color leakage. When adding thin lines, we will increase the pressure of the scraper to reduce the amount of color leakage, and the thin lines will appear clearly.

The sixth is that the cutting area is large, so it is difficult to pave it manually. In order to solve this problem, one person is inside and one person is outside at a distance of 50cm in the middle of the machine, which is aimed at laying cloth for large cloth pieces. The simultaneous laying of films by two people is not only fast, but also effective.

The seventh is affordable and durable. For the sake of the interests of the printing factory, the machine uses exquisite materials, and most of its parts are general accessories of the printing machine, so that the machine is durable during operation. Generally, the machine does not need to be replaced, and it can be maintained normally according to the instructions.

The eighth is convenient maintenance. This full-automatic printing machine is controlled by PLC, and most of the components are Swiss ABB modules. The lamp is a wearing part (guaranteed within 8000 hours), but it is famous brand The product is very convenient for purchase and replacement. On the whole, no matter the mechanical part or the electrical part, its accessories are universal, so once the machine breaks down, maintenance is very convenient.