Chongqing: Children'S Clothing Needs Careful Identification Of Quality.

Recently, Chongqing The city's Bureau of industry and Commerce has monitored the quality of children's clothing in circulation. Commissioned by Chongqing fibre According to the Inspection Bureau, 9 sets of samples were unqualified (unqualified goods and the names of the monitored persons were attached to the attached table). The unqualified items found in the monitoring were composition content, color fastness to rubbing, sweat fastness and water fastness.

The children's clothing sold in Yuzhong District, Dadukou District, Shapingba District, Nan'an District and Bishan county were tested by 8 sellers. According to the introduction, the composition content is not qualified, which means that the content of the express ingredients is not consistent with the actual content, for example, the content of the express ingredients of the product is cotton, polyester and spandex, but the actual detection results are only cotton and spandex. The color fastness is not qualified, which means that the actual quality of the commodity has not met the requirements of the corresponding standard of the product standard. For example, the standard FZ/T81003-2003 "children's clothing and student clothes" stipulates that the color fastness of the qualified products is more than 3 grade. If the actual detection value is lower than the grade 3, the clothing is easy to decolorization, and the dyestuff on the clothes may be spanferred to the human skin, which can induce skin diseases under the biocatalytic effect of the bacteria.

Chongqing city commerce and Industry Bureau will monitor the situation in accordance with the law. quality The seller of disqualified goods shall deal with it. Meanwhile, the business sector reminds consumers that when buying children's clothing, we should pay attention to the following points:

Various labels on children's wear. Is there any Chinese factory name, logo, logo, logo, specification, certificate, product standard, product quality grade and other identification. In addition, if the product has formaldehyde content, 0-24 months of class a infant clothing should be less than 20mg/kg, larger than 24 months, B children's clothing that is directly exposed to the skin is less than 75mg/kg, and children's clothing that is not directly exposed to the skin is less than 300 mg/kg. The permanent identification of children's clothing should be made of soft materials and stitched in the proper place. Attention should be paid to avoiding direct contact with children's skin and preventing the skin damage of children due to friction.

Identification of appearance quality of children's clothing. Are there any obvious defects on the main surface? Whether the main joints are chromatic aberration or slippage. Slippage is usually referred to as "slippage" of fabric or fabric "row of silk". The degree of slippage is not up to the required standard, which indicates that the strength of the garment is not strong enough to cause the seams of shoulder joints, sleeve holes and side seams to be disconnected and can not be worn. When you buy clothes, you can pull them on the side seam to see if there is "slippage" in the seam. Pay attention to the "slippage" situation.

Sewing quality identification of children's clothing. Whether the sewing lines of all main parts are straight and whether the joints are uniform. Are the symmetrical parts consistent? The two parts can be closed to check whether the symmetrical parts are accurate.

Identification of fabric composition of children's clothing. Because children's clothing is usually made of cotton fabric, the way to identify cotton fabric by burning method is to draw a strand of yarn (including warp and weft) at the edge of children's clothing, and ignite it with fire, observing the state of burning flame. The cotton burns faster, the flame is high, and it can spread automatically, leaving a small amount of soft white or gray ashes without coking.