The Pfer Of The Garment Making In The Middle Of The Thoracic Province

L, after the pfer of the chest, the opening of the mouth is broken, usually the upper half is an oblique effect. How do you manage to make the top and bottom of the front end of the yarn become the same?

2. From the effect diagram, the upper and lower parts of the front stop are double folded.

The upper and lower sections of the mouth are not on a straight line. How do they cut them?

3, what is the reason for the yarn processing of collar?

4, in the technical review, "what is the meaning of this part?"

1. The upper part of the chest is just a designer.

The design does not contain the amount of breast added, and the designer takes such a hollowing design to design the provincial road in this part, while the chest volume is placed in the open vertical Province, so there will be no oblique effect.

2, because of the opening of the vertical opening, the lower part of the front part is pushed outward, and the upper part is not in a straight line. From the effect picture, there are some loose parts in the upper part, and the lower part is tightly wrapped on the human body, so that the upper and lower parts also form a chromatic aberration. As a result of adopting stronger elastic fabrics, the cut part is cut into a continuous folding garment piece according to the upper part of the cut line, and the outward part of the lower part is removed for processing. Because the knitted fabric is elastic, the upper part of the chest does not relax.

3. From the picture, the collar is double fold.

And there is no tightness, so we do not need oblique wire processing, and take the same yarn as the big body, straight yarn.

4, when cutting, we remove the lower part of the part which is pushed outward, so we should force the lower part of the elastic fabric by force.

Technical comments:

The simple style made it difficult to make the board. We put the chest in the dart where the chest was empty. The provincial road did not reach the bottom swing. The predecessor was treated again.

The upper part has a certain degree of looseness, and the lower part is used for poking, so that the shape of the plate can be established.

Product specification: unit: CM garment length: 58 bust: 85 shoulder width: 39 sleeve length: 20 cuffs: 30