To Strengthen The Control Of Formaldehyde Content, We Must Guard Against The Five Barriers.

Spin

The formaldehyde content in products has been strictly limited, and China's national basic safety technical specification for textile products has also imposed a mandatory requirement.

But in the daily inspection and supervision, I found that the formaldehyde content of textile and clothing exceeded the standard.

It is found that many parts of the textile production process may cause excessive formaldehyde content, such as wrinkle resistant finishing, softening finishing, stiffening finishing, dyeing, pigment printing and so on.

Therefore, to control formaldehyde content, textile enterprises must strengthen control over all aspects of production.

This article comes from textile resources, please users directly in the browser directly input textile resources to see.

formaldehyde

In order to test the formaldehyde content of each batch of raw materials and finished products, it is permitted to produce and discharge products. The three is to finish the dyeing and finishing process of the finished products, and to make different processes for different raw materials and processing equipment. The formaldehyde content is detected in time according to the analysis that the formaldehyde content is easy to exceed the standard. It is found that the problems need to be adjusted in time, so as to ensure that the testing is up to standard; four is to improve the quality of the personnel, enhance the understanding of the importance of the internal quality management for the formaldehyde content reaching the standard, and further strengthen the quality inspection work; five, check the key products, and strengthen the inspection of the infant clothing with higher limit and exceeding the standard and the direct contact with the skin products. We must make good use of the five barriers: first, we must ensure the quality of raw materials and suppliers with good quality and good credit; two, we must check the quality inspection.

In addition, different countries have different requirements for formaldehyde in textiles, and there are differences in the detection methods.