Change Of Shoe Line

Through the design of round mouth shoes, pointed shoes, square shoes and so on, we can know that the process of designing women's shallow shoes is simple, but requires more, and emphasizes on the design of lines.

The design of shoe line is common in the following types.

(1) the design of toed toe shoes is intended to reveal the middle toe of the feet. It is in a state of dew and dew, which increases the sex appeal.

Generally choose super long shoe last or square shoe last, mainly flat, middle and last, so that there is a certain proportion of space in the toe of the shoe. The mouth door shape focuses on the round, square and heart-shaped shoes. The design of the rear shoes is very high, generally up to 58 to 60mm, because these shoes belong to the requirements of special shoes, but also according to the actual situation of the customers.

(2) the convex arc type shoes mainly refer to the obvious "shrimp arch" on the back waist, and the feeling is more publicized.

The front and rear line of the shoe line is larger and larger, and the difference between inside and outside is bigger. Generally speaking, the middle and high heel are the main ones. The depth of the door can be set according to the requirements. Such shoelaces have obvious line trend requirements. The design should pay attention to line pition and straighten out problems, which are mostly exported footwear, as shown in figure 3-2-15.

The bow line of the shrimp is similar to the last corrugated line.

(3) straight-line shoes of this type mainly refer to the shape of the rear shoe line, which is straight and straight. It is a straight and straight feeling.

The width of the mouth extends from the width of the mouth to the heel, the change is small, the door is deep, and the width of the door is moderate, and the heel height is generally dominated by the middle heel.

There are many kinds of decorations on toe ends. This type of shoes is mainly sold domestically, as shown in figure 3-2-16.

The lines on the waist of the shoe are slightly curved, which is more straight than the shrimp bow line, similar to the straight line type.

 

(4) concave arc type shoes, the middle side shoe contour is downward curved curved arc, no tension, but feel relaxed and leisure.

Choose flat heel, middle heel shoe last and export shoes.

On the difference of shape, the lowest position of concave arc has three areas respectively: the first kind is the location at the beginning of the width of the mouth door, the bending position is relatively front, and the back is longer; the second type is in the upper waist position of the upper, and the third is in the slightly backward position of the shoe waist, as shown in figure 3-2-17.

With the backward position of concave arc, the stability is gradually broken, and the movement is gradually strengthened.