Home >

Shenyang Hong Vigorously Promotes Three New Textile Machinery Products

2010/5/27 10:23:00 29

Shenyang Hongda Company promotes the three products of JWF1302A single eye digital uniform drawing frame, JWF1312A binocular digital uniform drawing frame and high intelligent G1768-280 air-jet loom, exhibiting the level of scientific and technological progress and product upgrading strength of the company.
The machine is a mature model of our domestic short film leveling drawing frame. It is also the main model to replace the imported similar equipment. It has the characteristics of stable host performance, reliable uniform system, accurate monitoring and monitoring, high production efficiency, high cost performance and wide application scope. It is the preferred model for continuous, efficient and high quality production of textile users.

This machine is suitable for 20~76 mm long cotton and cotton type. chemical fiber The pure spinning and blending of medium and long fibers can be used for single channel merging after the combing of some kinds of yarns. It can also be widely used in the end line merging of all kinds of yarns. It has obvious effect on improving the weight unevenness of the yarn and ultimately optimizes the yarn index. Especially in the aspects of high cost, small floor area and low maintenance cost of spinning combing, compared with imported similar products, it has obvious advantages in cost performance, which can fully meet the needs of various spinning conditions, and is an ideal universal product.

Equipment features: unique drafting form, so that the quality of high-speed winding can be effectively guaranteed, reduce or eliminate fiber crooked hook and pleat; the material of the lower roller material is special diamond, professional production; transmission components adopt the form of toothed belt, flat belt and triangle belt, and specialized production of uniform inspection box and differential box; electric control adopts (PLC) programmable control combined with touch screen to realize the automation of the whole machine; the configuration of USTER segment uniform system is even 25%.

High intelligence G1768-280 air-jet loom

The G1768-280 air-jet loom has the characteristics of reliability, low energy consumption, intelligence and humanization. It can provide users with reliable and competitive fabrics. The electric control system of G1768 air-jet looms has completely independent intellectual property rights. The weft insertion part of the system is controlled by single chip microcomputer, which is highly real-time and highly suitable for high speed weft insertion. The weft detection system can automatically perceive the weft insertion environment changes and conduct self adjustment of weft filling. The weft filling system has two modes of counting and angle control, which are convenient for users to use. The JWXZAL1 touch-screen is used as the setting and displaying part of looms, and various parameters of looms are set and displayed for various data of looms running. Statistics Loom production data; interface Design It is reasonable that the loom can be set up through the picture, so it is easy to master. The network interface is reserved for the loom network, so that users can centrally manage. Various specifications are available, the width is 190cm, 230 cm, 280 cm, 360 cm.

Equipment features: the machine adopts bilateral six link beating up mechanism; the main drive adopts super start motor, which can improve the beating force of the first weft; the upper spindle is equipped with an embedded guide bar; the electronic let off and electronic take-up device adopts double rear beams plus positive loosening device; the FDP weft accumulator is equipped with counting sensors to avoid the long and short weft caused by air pressure fluctuation; the bearings of the main transmission parts are lubricated in the oil bath, the manual pressurized quantitative centralized lubrication, and the other parts are lubricated regularly with lubricating grease, ensuring the service life of the looms and lowering the labor intensity of the workers.

JWF1302A single eye digital uniform drawing frame

The machine is based on summarizing the experience of R & D and manufacture of many years' single eye drawing frame, combining with modern textile technology. Technology And developed a wide range of short spinning single eye uniform drawing frame.

Many new technologies have been applied for national patents in the design of JWF1302 drawing frame. In the aspect of electrical control, modern advanced computer control technology is adopted, and the system has high reliability. Using touch screen design, the control software is further optimized, the human-machine interface is friendly, the content is rich and easy to operate, the state information of the whole drawing frame can be obtained, and the working frequency of the frequency converter can be set directly through the interface, and the output speed can be changed, and the running state of the machine can be monitored in real time. The new transmission linkage and quick change structure are widely used in the transmission mechanism of the machine, which can greatly improve the speed of variety transformation. The application of high-speed arc tooth synchronous belt can realize the clearance free transmission, improve the reliability of the transmission and stabilize the quality of the strip. It provides a guarantee for the production of multi variety and small batch products.

When combing and running at high speed, the machine is good for holding the fiber. Its own "expert clinic" system and reliable anti electromagnetic interference ability improve the quality of the sliver, reduce the bending of the fiber at high speed, and improve the leveling effect. cotton spinning The process adjustment, lighten the labor intensity of the operator, and maintain more quickly and conveniently, has become the preferred product to replace the imported single drawing frame.

Equipment features: the machine widely uses synchronous belt drive, V belt cross drive, new transmission connection, pneumatic pressure and other advanced technology. It can use the Swiss USTER USG self leveling control system or the embedded full digital self leveling control system. It has the advantages of high detection accuracy and strong anti-interference ability, and the uniform range is + 25%.

The auto leveling control system uses the FP sensor to carry out the output monitoring, and the detection accuracy is high. When using the embedded self levelling control system, the digital sensor is adopted, and the output cotton sliver detection adopts the non-contact on-line detection system, which does not touch the cotton sliver, and has strong adaptability to the changes of working environment conditions, and can automatically adjust and ensure the quality.

The machine is equipped with a single machine expert system, which can carry out quality analysis and fault diagnosis on line, and the electromechanical integration reaches the international advanced level.