Self Compiled And Installed Input Method In Windows

As long as you learn pinyin, you will use pinyin input method to input Chinese characters.

Pinyin input is a common way of input Chinese characters by non professional typists.

In order to improve the speed of Chinese character input, the "double spelling" input method is usually used to input Chinese characters into Pinyin input method.

The Pinyin in DOS is different from that in windows. If you want to use familiar DOS in the windows, you have to install the input method in Windows itself.

Before installation, you must create the input code table, and then install it through the input method generator.

First, create the input code table, the original file, create an input code table original file (extension.TXT's text file), such as the name "sp.txt".

In the sp. TXT file, enter the following contents: [Deion], Name=, personal duplex, MaxCodes=4 MaxElement=2 UsedCodes=, abcdefghijklmnopqrstuvwxyz WildChar=, NumRules=3, [Rule], NumRules=3, [Rule], etc.

Among them, "ce2=p10+p20" means two characters, take all the codes of the first word and all the codes of second characters; "ce3=p11+p21+p31+p32" means three words, take the first code of the first word, the first code of second words, the first and second codes of third words, the word "ca4=p11+p21+p31+n11" showing four words and the words above four words, take the first code of the first word, the first code of second words, the first code of third word, and the first code of the last word.

The "a" in this "AE" below (two) [Test] represents the initials "zh" of "this", and "e" represents the vowel of "this".

The "a" in "Chinese agrr" represents the initials of "Zhong", and "g" represents the initials of "Guo". "RR" represents the initials and vowels of "people" respectively.

The "aggd" of "aggd" of the Communist Party of China represents the initial consonant of the first word, the initials of the second character, the initials of the third character and the initials of the last word.

The coding of other words and phrases is identical.

Save it after editing.

Two. Install the "personal duplex" input method. First, copy the sp.txt file to the C:windowssystem folder, then operate the input method generator to install.

The steps are as follows: 1, click the "input method generator" in the attachment.

2, in the active window "input method generator property", select the create input method label, click Browse to select the source code (C:windowssystemsp.txt).

3, click the conversion button.

At the end of pformation, click OK.

4, click create, then press prompt. When the system prompts the user to install the input method, choose yes, and the system will automatically install the input method.

After the above operation, the "personal double entry" input method has become a member of the built-in input method of the system, and has the Windows characteristic and function input method.

You can use the familiar double entry method in windows.

Note: if there is no "input generator" in the appendix, it can be installed in the following way.

Click "start", "Settings", "control panel", "add / Remove Programs", "Windows Installer", "components", "accessories", "input method generator", and finally click OK.

Three. Customize new words. When you write sp.txt files, you can input commonly used phrases or phrases (for a long time), and you can input them quickly when you use them.

You can also add custom neologisms through "manual word creation", and you can also maintain user's extended thesaurus.

The method is: 1, activate the "personal duplex" input method, move the mouse to the "personal duplex", when the mouse becomes a little hand, click the right button; 2, mouse point to "manual word creation" and click; 3, choose "create word" function item.

After entering the custom words in the word box, press the Enter key or select the Add button, and the cursor automatically jumps into the outer code box.

After entering the outer code of the custom words in the outer code box, pressing the Enter key or selecting the Add button, the target words and their outer codes will be listed in the word list box and stored in the extended thesaurus.

Then click close.

If you want to change the new word of the user extension word library, select "maintenance", select the object to be modified in the word list, click Modify, then you can modify the words and the code; if you click "delete", delete the words.

Four. Take away the input method. Double click the "input method generator" in the attachment.

Select the "reverse conversion" label, click "open the file", select a code table file (such as sp.MB) and open it, click the "reverse conversion" button, reverse the conversion of the code table, pform the end, click "confirm", then generate the code table source file (.TXT file), such as sp.txt file.

Then the user can browse, edit or copy the copy, which can be installed on other machines.