Those Sole Accessories You Are Not Familiar With.

< p > < strong > jacquard band < /strong > < /p >.

< p > generally it is made of polyester yarn, nylon yarn, PP line, PP material, polypropylene yarn, acrylic yarn and so on.

< /p >

< p > first, through computer drawing, putting the picture into the computer jacquard machine program and debugging the textile.

The jacquard belt is also divided into warp and weft, which are woven by computer jacquard looms and vertical lines. Weft is woven from the pverse direction of the yarn through the jacquard belt.

< /p >

< p > > a href= "http://cailiao.sjfzxm.com/" > jacquard band < /a > is a fashionable and fashionable ribbon weaving technology. Its appearance is three-dimensional and exquisite, weaving more beautiful patterns such as flowers, birds, fish, insects, birds and beasts.

Brand jacquard, logo clearly visible, bright color, very high grade, not only can increase the added value of the product, but also enhance the brand image.

The jacquard belt has fine pattern, soft handle, strong resistance, long wearing resistance, high color fastness and no deformation.

The pattern of the jacquard belt is relatively simple and single, and the weft pattern of the weft belt is large and exquisite, and the color level is clear and the three-dimensional sense is strong.

< /p >

< p > jacquard belt can also be divided into one side jacquard and double-sided jacquard.

Double sided jacquard is a jacquard pattern on both sides. This jacquard is more beautiful and fashionable, highlighting the designer's design concept.

< /p >

< p > usage: < /p >

< p > commonly used in < a href= "http://www.91se91.com/news/index_c.asp" > dress > /a > dress, shoes and hats, high-grade bags, shoulder belts, belts, belts, decorations and other industries.

< /p >

< p > < strong > middle bottom < /strong > /p >

< p > midsole is a combination component produced in assembly production due to the needs of equipment and the updating of product materials. The rationality of the middle sole is that the appearance quality of the shoe is clear and the shape is beautiful, but the inner quality is not easy to deform and wear comfortably, especially in the bottom production.

The middle bottom is composed of three parts: inner bottom, half inner bottom and center. The rivet and half inner bottom are riveted to reinforce the press, and then the edge is cut to the hard part of the last.

Its length and width are in the semi insole, the center position is 10mm from the back edge, the front foot is 55%, and the middle bottom material can be regenerated leather or polyethylene.

< /p >

< p > < strong > foam < /strong > /p >

< p > foam is divided into PU foam, antistatic foam, conductive foam, EPE, anti-static EPE, PORON, CR, EVA, bridge PE, SBR, EPDM, etc. it has the characteristics of convenient use, flexible bending, super thin volume, reliable performance and so on.

< /p >

< p > foam is divided into PU foam, antistatic foam, conductive foam, EPE, EPP, flame retardant foam, antistatic EP < /p >

< p > characteristics: < /p >

< p > 1, low pressure very good shielding effectiveness, shielding effectiveness is more than 90dB.

< /p >

< p > 2, elastic and light.

< /p >

< p > 3, anticorrosive nickel coating can prevent electrochemical corrosion.

< /p >

< p > 4, low surface contact resistance.

< /p >

< p > 5, rapid pressure sensitive fixation.

< /p >

< p > 6, < a href= "http://www.91se91.com/business/" > Customer < /a > length can be specified.

< /p >

< p > 7, cross section selection.

< /p >

P > 8, UL fire protection.

< /p >

< p > 9, and the product can be sticky with a stable quality, heat resistance, hard to peel off and high tensile strength. After the product is installed, the quality of the product is still maintained at low temperature of -20 to 80 degrees C and cycle test for 72 hours.

It has a series of characteristics, such as easy to use, easy to bend, super thin and reliable in performance.

< /p >