Different Sports Fabrics Meet Your Different Needs.

< p > < strong > sports fabric > /strong > /p >

< p > < strong > 1.Refreshing sports fabric < /strong > /p >

< p > > a href= "http://admin.sjfzxm.com/admin/admin.htm" > sportswear < /a > with the characteristics of sweat absorption, quick drying or hygroscopic and sweat perspiration, it can be called "Refreshinggarments", providing a sense of comfort for competitors and creating good results on sports grounds.

The concept of this kind of clothing design comes from the capillary phenomenon of trees, such as Fieldsensor, a multi-layer polyester knitted fabric, whose inner layer is coarse Danny polyester yarn, which is directly contacted with the skin, and the outer layer is hydrophobic fine Danny polyester yarn. The dense surface structure can accelerate the sweating effect. < /p >

< p > sportswear.

Cubesensor and Coolmagic woven fabrics, Aerosensor double faced warp knitted fabrics, develop similar and more differentiated functions.

In the Technorama lab, it has been proved that the moisture absorption of the Fieldsensor fabric is lower than that of the ordinary T/C fabric in the running. As shown in figure eight, in addition to the above mentioned properties, the reflective sunlight / anti UV fabric "Aloft" is also devoted to the development of the reflective polyester / polyester fiber yarn. The core part is filled with special ceramic particles to improve its physical properties. The Aloft fabric is compared with the traditional polyester fiber under visible light, infrared and ultraviolet light.

< /p >

< p > < strong > 2. moisture permeable waterproof fabric < /strong > < /p >

< p > the design concept of moisture permeable waterproof fabric is to prevent the penetration of raindrops, fogs and snow. The sweat from the human body can be discharged smoothly. In addition to achieving excellent waterproof performance, the wearer will not feel stuffy. As the well known CF Goretex fabric is not suitable for mountain climbing and sea activities.

Toray's Entrant is a moisture permeable waterproof material coated with PU resin, which excludes excessive moisture from the inner surface of the fabric. The annual output in Japan is 1 million 300 thousand meters.

Toray another non coated high density "HZOFF" is a polyester superfine Danny air interwoven yarn, and its structure has high moisture permeability.

< /p >

The newly developed EntrantG-II of < p > Toray is made up of double density PU honeycomb membrane with different density. Its moisture permeation reaches 8000g/m2/D, and the size of raindrops is 100 to 500 micron (from drizzle to torrential rain).

At present, the "Dermizax" is developed for non porous PU resin coated on polyester woven fabric, and its moisture permeability can be less than /p.

< p > 5500g/m2/D.

Moreover, the porous resin can discharge moisture from the fabric at high temperature, and keep warm when it is low temperature, while maintaining the < a href= "http://admin.sjfzxm.com/admin/admin.htm" > fabric > /a > moderate humidity.

< /p >

< p > < strong > 3. thermal insulation fabric < /strong > < /p >

< p > fabric absorbs sunlight energy and pforms it into heat, which is stored in the fabric to achieve the effect of keeping warm. This product has been developed by Unitika and is called "Solor-a". Zirconium carbide is added to the part of the conjugated polyester fiber core to make the fabric warm.

Toray's Megacron absorbs solar energy from solar absorbers. A layer of metal oxide and zirconium oxide fibers are woven into the fabric. After absorption by the sun, the infrared heat energy is released and the temperature is raised to achieve the warmth retention function.

Another product Querbinthermo, the fabric surface has discoloration, the reverse is < /p >.

< p > the sportswear is a ceramic layer. When the light is irradiated, when the temperature is higher than the normal temperature, the surface will appear white. When the temperature is low, the color will turn black.

Further development, heat insulation fabrics developed for alpine climbing and cold climates, using high-density hollow fibers, coated with a layer of metal under the gas phase, which is pmitted by radiation to heat sources and circulated to control the distribution around the fabric.

< /p >

< p > < strong > 4. low resistance resistance < a href= "http://www.91se91.com/news/index_f.asp" > sports fabric < /a > /strong > /p >

< p > in swimming and skiing competitions, due to fierce competition, often the gap is 0.01 seconds, so in order to meet the needs of such athletes, the function of low resistance resistance arises at the historic moment. In terms of bathing suits, high needle number (32G) double-sided warp knitted fabrics, which are blended with nylon and Danny yarn and elastic yarn, such as Toray's Acquapin fabric can reduce the frictional resistance of water by 10%.

The other product Acquaspec has better function and can reduce resistance to 15%. It is made of polyester superfine Danny surface finishing.

Others, such as Descente company, use corrugated wire to form fine grooves on the surface of the fabric to reduce the frictional resistance in water. The same design concept is applied to air fluid to reduce the resistance of skiing jumper in the air.

Dimplex fabric is co operated by Descente and Eschler company. The corrugated wire is convex on the surface of ski jumping fabric, so that the air resistance can be minimized in the stage of starting, taking off and flying in the air.

< /p >

< p > < strong > 5. super high strength fabric < /strong > < /p >

< p > athletes often have violent and violent movements in competitions, such as fast slipping, collision, and collision.

Dynamonus fabric is made of high strength polyester staple yarn blended with 5 to 15%P- aromatic polyamide fiber (Gao Qiangli fiber). It has superior heat resistance and can resist friction, friction and /p.

< p > > a href= "http://www.91se91.com/news/index_f.asp" > sportswear < /a > mountaineering, to prevent cutting by the sharp corner of rock, its four main antiwear properties, as shown in Figure thirteen, have been extended to work clothes, sportswear and industrial use besides sports wear.

Apart from sportswear, ordinary consumers are also concerned about the functional clothing they have. What kind of functionality does it have? This demand has been gradually expanding.

Mr.K.Hayakawa puts forward new ideas for the future. The appearance of ancient aesthetics is "nude", which means that the design of future sports clothes must be molded according to the human body structure, so that the resistance and binding force can be minimized in motion, expecting the new products to respond to more different needs in the future.

< /p >