CELINE Colorful Shoes Reshaping Traditional Shoemaking Technology

< p > if Venice is known to the world because of its distinctive palaces, architecture and climate, then the LaSerenissima surrounding areas will be highly praised by luxury experts for professional "a target=" _blank "href=" http://www.91se91.com/ "leather" /a "and" a target= "_blank" _blank ".

On the banks of Padova, the CELINE workshop is trying to pform all the new ideas of IvanaOmazic's shoe design into reality.

Every season, hundreds of sketches are interpreted, moulds and models are produced, and, without violating the important principles of ensuring the comfort of shoemaking, it is as close as possible to the manuscripts of creative directors.

In order to perfect every pair of shoes, it is difficult to count the samples and time.

For the Opanka model, the whole production process becomes more complex, because soles are a key part of shoe design.

Even before thinking about every season's vamp, you must first use traditional methods to make sole.

< /p >

< p > Opanka sole made of top glossy cowhide.

Craftsmen in the vicinity of Bologna still have the technology of making skins into perfect leather.

The quality of tanning is very critical because it determines the success of Opanka soles.

The thickness of the sole will be systematically controlled between 4 and 5 millimeters before any minor machining starts.

< /p >

The manufacturing process of < p > Opanka sole includes the following 5 steps: < /p >

< p > first soak the leather in water for 60 to 90 minutes.

< /p >

< p > then put it outside for 24 hours of partial drying.

< /p >

The hot trade union after "P" gives the unique shape of the Opanka sole.

The leather which is still slightly wet is put into the press tool one by one. The rubber model and the aluminum pressure plate used in the press are different from each half of the shoe size.

In the process of hot pressing, the pressure plate relaxes the leather fiber to a certain extent and is then pressed into the model, thus creating the unique shape of the Opanka sole.

< /p >

< p > followed by the molding process is the final outdoor drying process, usually for several days.

< /p >

< p > the last step is cutting: the sole is made according to the rough machining made by the craftsman in advance to achieve the height of the shoe edge selected by the IvanaOmazic.

After that, an inner sole may have 1.5 soles to be added to the interior. The Opanka soles are painstakingly drawn by hand according to traditional methods.

< /p >

< p > in the adjacent workshops, the style is < a target= "_blank" href= "http://www.91se91.com/" > designer "/a" is responsible for the creation of future shoes.

The stereotyped shoe mold will first be digitalized and recorded.

Its dimensions, components, holes and all details are stored and pformed into styles.

A simple design may have up to 35 different kinds of leather inlays and more than ten kinds of shoes.

< /p >

< p > this is the actual situation of color sandals this season.

The sandals are elaborately made of eight different kinds of lacquer and a variety of open lines.

< /p >

< p > for each piece of leather, the tailoring is the first step, first separated according to its thickness and then thinned along the edge.

After being reinforced with an inner lining, the leather forms the upper part of the shoe, that is, the upper.

Next, each leather is cut into a final shape again, using a tool connected to the computer software, and its accuracy reaches millimeter.

< /p >

< p > computer record production process, and help artisans do assembly work, for different leather interlacing collocation is even more so.

After that, the whole piece of leather will be expanded on the three-dimensional foot model, called "modeling".

Reduce the extra thickness by stitching and polishing: assembling a shoe is like creating a puzzle.

< /p >

< p > the assembled parts are first connected to the first sole and then put into the Opanka sole.

Another peculiarity of Opanka is that its vamp is sewn on the edges of the upper and the shoe with a bright and clear thread in a riding nail.

This is the sign of the pure Opanka sole.

Then add the heel and print the CELINE logo on the sole.

The last pair of shoes were repeatedly checked, including even the smallest details and stitches, polished, and then wrapped in paper.

< /p >

Less than three weeks from the production of Opanka sole models to the delivery of finished products to more than 130 specialized shops in the CELINE world, nearly 100 craftsmen devoted much effort to the hand-made shoes with distinctive soles. < p >

< /p >