Shoes Insole Design

< p > < a href= "http://www.91se91.com/news/index_x.asp" > < /a >, mainly based on the chassis at the bottom of the last type, the inner bottom template is correct or not, which is very related to the molding of the outsole and shoes.

< /p >

< p > < strong > full sole shoe interior design < /strong > < /p >

< p > use kraft paper, slightly larger at the bottom, knead softening, then brush the gasoline glue to < a href= "http://www.91se91.com/news/index_x.asp" > the bottom of the shoe last < /a >, pasting it on the bottom of the last step and pushing it flat. If there is an uneven phenomenon on the side of the waist, several cuts can be made, but do not cut it into the chassis, draw the outline of the last with the side of the last edge of the pencil.

< /p >

< p > take off the sticker, place it on another piece of paper, cut the bottom sample with a pair of scissors and press the pencil line, and then carefully compound it with the last chassis. If there is any discrepancy, it can be corrected in time.

According to experience, if the last bottom is 242mm long, the length of the inner bottom is shorter than that of the last bottom 0.5-1mm, that is, the length of the inner sole is only 241.5-241mm.

The reason is that the inner bottom is easy to produce 0.5-1mm after processing, so it should be taken into account when cutting the sample.

Finally, confirm the accuracy of the sample, write the number, size and length of the last one on the bottom sample.

< /p >

< p > < strong > half inner bottom design < /strong > < /p >

< p > half insole design is generally the same as the inner sole. The middle half of the inner bottom and the inner bottom are provided with shoe hooks to strengthen and enhance the backing force of the shoe waist. When walking, it can bear the pressure of the human body and keep the product structure without deformation.

< /p >

< p > the length of half insole should be determined according to the structure of < a href= "http://www.91se91.com/news/index_x.asp" > shoes < /a >. The half insole of high heel shoes should be lengthened appropriately, which usually takes up 63% of the foot length. The vertical line of the heel line should be taken. The half insole of the heel can be shorter, which is 62 of the foot length.

At the same time, in order to save labor and save materials, the half inner bottom can be two yards in one yard.

The width of the half inner bottom can be measured according to the width of the inner bottom.

Because usually the inner half is smaller than the inner bottom, the back part of the waist is a slope at the bottom of the cutting, so that the upper is stretched to the back, but the waist is lined with a hook, so that the half insole is placed in a circle.

< /p >

< p > < strong > middle bottom design < /strong > < /p >.

< p > midsole is a combination component produced in assembly production due to the needs of equipment and the updating of product materials. The rationality of the middle sole is that the appearance quality of the shoes is clear and the shape is beautiful, but the inner quality is not easy to deform and wear comfortably, especially in the "a href=" http:// www.91se91.com/news/index_x.asp "bottom" /a "production.

The middle bottom is composed of three parts: inner bottom, half inner bottom and center. The rivet and half inner bottom are riveted to reinforce the press, and then the edge is cut to the hard part of the last.

Its length and width are in the semi insole, the center position is 10mm from the back edge, the front foot is 55%, and the middle bottom material can be regenerated leather or polyethylene.

< /p >

< p > < strong > half inner bottom design < /strong > < /p >

< p > half insole design is generally the same as the inner sole. The middle half of the inner bottom and the inner bottom are provided with shoe hooks to reinforce and enhance the a href= "http://www.91se91.com/news/index_x.asp" > the waist waist > /a > the supporting force of the nest part. When walking, it can withstand the pressure of the human body and keep the product structure without deformation.

< /p >

< p > the length of the half insole should be determined according to the structure of the shoes. The half insole of the high heel shoes should be lengthened properly, which usually takes up 63% of the foot length. The vertical line of the heel line should be taken. The half insole of the heel can be shorter, so that it will account for 62 of the foot length.

At the same time, in order to save labor and save materials, the half inner bottom can be two yards in one yard.

The width of the half inner bottom can be measured according to the width of the inner bottom.

Because usually the inner half is smaller than the inner bottom, the back part of the waist is a slope at the bottom of the cutting, so that the upper is stretched to the back, but the waist is lined with a hook, so that the half insole is placed in a circle.

< /p >

< p > < strong > middle bottom design < /strong > < /p >.

< p > midsole is a combination component produced in assembly production due to equipment needs and product < a href= "http://www.91se91.com/news/index_x.asp" > material < /a >. The rationality of the middle sole is that the appearance quality of the shoes is clear and the shape is beautiful, but the inner quality is not easy to deform and wear comfortably, especially in the bottom production.

The middle bottom is composed of three parts: inner bottom, half inner bottom and center. The rivet and half inner bottom are riveted to reinforce the press, and then the edge is cut to the hard part of the last.

Its length and width are in the semi insole, the center position is 10mm from the back edge, the front foot is 55%, and the middle bottom material can be regenerated leather or polyethylene.

< /p >