Analysis Of The Design Principle Of Sports Shoes

Footwear > /a > shoe type and template design work, we should first understand the relationship between the percentage of joints in each part of the foot bone, foot shape, shoe last and foot type, and find out the appropriate design positions for all kinds of shoes. The so-called "proper location" can cover a fairly wide range, but its basic requirements do not affect the operation function of the feet, and make the technology of shoe last stripping. In this principle, we can find out the appropriate and reasonable percentage ratio in the shoe design, so that we can have a theoretical reference point for the work of shoe design, plus the design curve of "beauty", so as to make shoes and shoes shape smoothly and reach a perfect state. < p > engage in < a href= "http://www.91se91.com/news/index_x.asp".

< /p >

< p > < strong > what is design? < /strong > < /p >

< p > the shape of shoes, denying that the line is changing, but it can not be against the manufacturing method and ergonomics. Therefore, based on the principle that we can not violate, we can find out a set of design rules, trying to find out the common benchmark points from the shoe last, and the common reference point is the so-called "six point design", which is as follows: < /p >

< p > opening point: for the < a href= "http://www.91se91.com/news/index_x.asp" > the toe of < /a > and the interface of the shoe body, or the dividing point with the eye piece, or the starting point of the tongue, the choice of this point is that the front of the point is the three degree space of a href= "http://www.91se91.com/news/ index_x.asp" > toe cap < /a > and the decision point for the two degree space of the shoe body at the rear of the point.

The design must take account of the discomfort caused by avoiding the bending of the forefoot, and at the same time, it is also necessary to consider the possibility of drawing last.

< /p >

< p > spacing point: the vertical line between the opening point and the center line of the last back. The location of the point depends on the change of the shoe type, and there is no absolute value.

< /p >

< p > heel height point: located in the rear heel centerline, its location is decided by the height of the shoe boot, which is mainly to stabilize the calcaneus after the foot, so as to avoid slippage when wearing, so it should not be too low.

< /p >

< p > < a > href= > http://www.91se91.com/news/index_x.asp > > shoe > /a > length: the length of the shoe mouth, the starting point is usually from the highest point of the instep to the height of the heel, and the length is slightly different from that of the designed shoes. For example, the roller of the golf shoes is shorter than the tennis shoes, because the basketball shoes have more jumps, and the short roll helps to stabilize the shoes, making them not easy to fall off, while the tennis shoes have a long roll, because the tennis sports have more opportunities for stepping, and the long binding force of the rollers is small, which can relieve discomfort and fatigue.

< /p >

< p > ankle height: located on the vertical line of the ankle bone, its height depends on the height of the designed cylinder, but one principle must be far away from the lower edge of the ankle to avoid frothing when wearing.

If the middle and high tube are designed, the middle ankle should be covered.

< /p >

< p > the highest point of shoe mouth: the vertical line between the length of the shoe and the center line of the last back is determined by the designed shoe type. The main function of the shoe is that the upper part of the shoe can actually wrap the instep. This choice is mostly made of sports shoes, and the design of men's shoes and women's shoes is usually omitted.

< /p >

< p > < strong > > a href= < http://www.91se91.com/news/index_x.asp > sports shoes < /a > the physical force is pformed into visual force < /strong > /p >

< p > in static natural objects, the strong movement perceived is often a visual phenomenon left behind by physical forces. As the sea rises due to the gravity reaction of the sea itself, it forms a wave of flexure and movement.

The earth's crust is formed by the surges of geocentric magma, including the clouds in the sky, the trees on the ground, the bending, hovering, and uplift shapes of the grass worm.

The movement, expansion, contraction, or growth force of a force, creating the shape of natural objects.

The forces and growth forces that are active in the shape of natural objects are not the result of human reasoning based on certain clues, but the forces perceived directly by human eyes.

Because physical force movement can give life sense to those shapes that can show their strength and trajectory.

Although the power to create these patterns is not directly related to the information pmitted to the eyes, the visual tension still can be perceived in these patterns.

With the help of some of the most powerful forms of nature, the design of sports shoes can make the thoughts surge and give the works a remarkable spirit.

< /p >

< p > although the action of these forces is a physiological phenomenon occurring in the cerebral cortex, it is still mentally perceived as the nature of the observed object itself.

Therefore, the pformation of physical force into visual power is the most expressive way of modeling design. Different times have different requirements for the tension of visual design.

Sneakers are one of the most developed varieties of modern clothing. They are the most dynamic and colorful design style.

The fast pace of life and diversity of life will never satisfy the personalized design needs of < a href= "http://www.91se91.com/news/index_x.asp" > sports shoes < /a >.

Two attractive elements in the design of sports shoes, a concise form and dynamic charm, will lead us into a garden of tolerance for human exploration.

< /p >