Chongqing Detected Nine Children'S Clothing Problems &Nbsp; Easy To Decolorization Induced Skin Disease.

Mom and Dad, give it to the children

City industry and Commerce Bureau personage introduces, this monitor is in Yuzhong area, Dadukou area, Shapingba District, south bank area, Bishan county 8 sellers place sampling inspection its sales of children's clothing.

After testing, 9 groups of samples failed.

The unqualified items found in the monitoring were composition content, color fastness to rubbing, sweat fastness and water fastness.

According to the source, the content of the ingredients is not qualified, which means that the content of the express ingredients is not consistent with the actual content. For example, the content of the express ingredients is cotton, polyester and spandex, but the actual detection results are only cotton and spandex. The color fastness is not qualified, which means that the actual quality of the goods does not meet the requirements of the corresponding standard of the product standard. For example, the standard FZ/T81003-2003 "children's clothing and student clothes" stipulates that the color fastness of the qualified products is more than 3 grade. If the actual detection value is lower than grade 3, the clothing is easy to decolorization. The dyes on the clothes may be pferred to the human skin and induce skin diseases under the biocatalytic effect of the bacteria.

Related links:

Attention should be paid to identifying regular children's clothing.

First,

Two. Identification of appearance quality of children's clothing.

Are there any obvious defects on the main surface?

Whether the main joints are chromatic aberration or slippage.

Slippage is usually referred to as "slippage" of fabric or fabric "row of silk". The degree of slippage is not up to the required standard, which indicates that the strength of the garment is not strong enough to cause the seams of shoulder joints, sleeve holes and side seams to be disconnected and can not be worn.

When you buy clothes, you can pull them on the side seam to see if there is "slippage" in the seam.

Pay attention to the "slippage" situation.

The quality of various accessories and decorations, such as whether the slide fastener is slippery, whether the buttons are firm, and whether the four buttons are suitable for tightness.

Pay special attention to the firmness of buttons or decorations so that children can easily tear them away.

The surface parts with adhesive lining, such as collar, barge head, bag cover and flap, are degumming, foaming or seeping.

Three, children's sewing quality identification.

Whether the sewing lines of all main parts are straight and whether the joints are uniform.

Are the symmetrical parts consistent?

The two parts can be closed to check whether the symmetrical parts are accurate.

Four. Identification of fabric composition.

Because children's clothing is usually made of cotton fabric, the way to identify cotton fabric by burning method is to draw a strand of yarn (including warp and weft) at the edge of children's clothing, and ignite it with fire, observing the state of burning flame. The cotton burns faster, the flame is high, and it can spread automatically, leaving a small amount of soft white or gray ashes without coking.