Home >

It Is Difficult To Implement The Standard Regulation Mechanism Of Clothing Fabrics.

2011/6/25 10:08:00 48

??? 日本語 Fran?ais English 中文

Supervision Mechanism Of Clothing Fabrics

The purchasing manager of a trading company in Hongkong soon encountered a difficult problem. He selected a pearl fiber fabric for foreign customers, but it was difficult to prove how to prove that the fabric contained pearl fiber component. Moreover, the report issued by the domestic inspection organization is not necessarily recognized by the international market.

When it comes to the status quo of domestic standards, two kinds of voices are usually heard. One is that the threshold is too high, and the other is that the access standard is too low.

To sum up, it is difficult for the standard mechanism to play a regulatory role properly.

High threshold enterprises bear extra burden

High density fine denier thin fabric is in recent years.

chemical fiber

A great development trend of the products, such as nylon 20D fabric, gram weight in 35g / 15D, and nylon 15D fabric, is lighter and more soft, and has better perspective effect.

Compared with the thicker nylon fabric, the strength index of high density fine denier product will be correspondingly reduced.

When discussing the issue with a purchasing director of a famous casual wear brand in China, she reluctantly indicated that because the national standards had not been followed up in time, enterprises could only adopt the existing high strength index coefficient for such new products. Although the enterprises also understood that this was unreasonable, the clothing brand enterprises did not dare to adopt it if the fabric strength was not up to standard.

Such phenomena are not uncommon in the industry.

Fabric enterprise

Or downstream buyers, knowing that some of the domestic fabric standards are too high, but for prudent consideration, they will not arbitrarily reduce the standard.

They either choose to enforce or reject products that are not up to standard. Even so, some problems are hard to avoid.

It is understood that the current domestic standards require that the wet rubbing fastness of sanding cloth should reach more than 3.

Since this standard is a mandatory standard issued by the state in the past few years, some domestic Brand Company require that this standard be implemented.

In order to achieve this standard, domestic fabric enterprises are basically achieved through the use of some auxiliaries or coating treatment methods, but these practices usually have some negative effects.

A certain Shanghai

printing and dyeing

From the point of view of professional technology, it is impossible for the standard to be realized on some fibers or fabrics without special treatment, and the special treatment such as chemical assistants or coatings can achieve the requirement of wet rubbing fastness. However, the performance of fabrics such as handle, moisture absorption and breathability will be affected.

And there is no such mandatory requirement in the world. In most cases, international brands will set different standards according to the fabric type and color depth.

For example, light colored cotton fabrics may require wet rubbing fastness to be above 3~4 grade, while dark colors require 2~3 grade rather than unified mandatory requirement of 3 or more.

The actual situation also proves that the standard height does not mean that the insurance coefficient is high, nor is it equal to the high product quality. On the contrary, it will make the enterprise increase unnecessary additional burden because of rigidities and lack of flexibility. At the same time, it also makes the standard lose its applicability and authority.