Discussion On The Appearance Quality Inspection Procedure Of Garment Standard In China

Current China

Compared with quality prevention, quality inspection can be said to be a step behind the clock, but it is still an important and effective means of control.

If prevention can be seen as a quality defect, the positive side of the test is that it will not happen again.

Therefore, while strengthening quality prevention, we must strengthen quality inspection.

The quality defects occurring in the garment production process are not found in the factory quality inspection and mixed into the qualified products, which is called leakage detection.

The reason for the leakage is that there is not a strict inspection standard, which is not operated according to the procedures, and the visual inspection is not in place, so that the quality defects can be missed.

Therefore, any garment inspection should design the inspection procedure in advance, so that every part of the product is within the visual control range, and the phenomenon of missing inspection is completely eliminated.

Similarly, for garment inspection institutions, uniform inspection principles and inspection procedures for clothing products can give a scientific and fair inspection report to the society and better safeguard the rights and interests of consumers.

Inspection procedure

The main inspection items for the appearance quality of woven garments by national or industrial standards are: raw materials, warp and weft yarn, pairs of stripe, color difference, appearance defect, sewing, specification permissible deviation and ironing.

According to the characteristics of garment products, the appearance quality inspection contents should be: from top to bottom, from left to right, from the past to the back, from the table to the inside.

Shirt quality inspection procedure: 1. trademark 2. collar 3. chest bag 4. two shoulder 5. buttons, buttons 6. doors, 7. pocket 8. sleeves, 9. sleeves, 9. sleeves, 10. measuring sleeves, sleeve length 12. measurement chest circumference measurement collar width measuring needle distance density.

　　西服質量檢驗程序：(上胸架)1.商標2.前領面3.豁口4.駁頭5.門里襟6.紐眼、鈕扣7.肩縫8.前胸9.手巾袋10.胸省11.口袋12.袖山頭13.兩袖前后位置14.袖子腋縫15.袖鈕16.袖口17.脅省腰部18.擺縫19.測衣長20.測袖長21.測胸圍(放平測)22.測肩寬23.測領大24.測針距密度(轉胸架)25.后領面26.領窩27.后袖縫28.后背縫29.背衩(翻轉里子朝外)30.掛面31.夾里肩縫32.里袋、筆袋、夾袋33.號型、商標、成分、洗滌標志34.夾里省縫35.夾里脅省36.夾里擺縫37.擺縫、掛面、滴針38.袖窿滴針39.領吊牌40.里背縫41.底邊(取下胸架)42.里、面、襯結合43.產品整潔44.對條對格疵點45.疵點46.色差47.針距密度48.輔料配件

Western trousers quality inspection procedure: 1. trademark 2. channeling belt 3. provincial road 4. two shoulder 5. eye, button 6. door pocket 7. pocket 8. bag cover 9. front and back crotch 10. below crotch cross stitch, trouser legs, trouser legs, trouser legs, trouser legs.

Through the above set of garment inspection procedures, it is easy to solve the garment factory inspection, when different inspection personnel at different times, according to the pre designed inspection procedures, make every part of the product within the visual control range, and eliminate the leakage phenomenon at all.