Home >

All Electric Sole Machine - Power Saving Shoe Sole Machine

2008/11/28 10:54:00 41927

??? 日本語 Fran?ais English 中文

In the field of injection molding machine, the concept of all electric has been popular for decades.

The fully electric injection molding machine develops rapidly with its features of environmental protection, electricity saving and high precision, occupying most of the high-end market.

But in the field of sole machine, whether it is made in China or imported, it is basically driven by hydraulic pressure.

The whole electric concept is still a blank in the shoe machine industry.

Double station sole machine sole working sole machine

What is the concept of all electric?

Why can electricity be saved?

To explain what is all electric, first of all, explain what is called hydraulic drive.

The hydraulic driving finger is used to drive the oil pump through the motor. The oil pump drives the hydraulic oil to generate hydraulic energy, and then drives the piston oil cylinder to make various actions.

The whole process is the conversion of electrical energy - hydraulic energy - mechanical energy.

In the middle, due to the friction of hydraulic oil will generate additional heat energy, and most of the motor pump will waste a lot of electricity.

In terms of energy consumption, hydraulic drive generates a lot of waste.

Moreover, the frictional heat generated by hydraulic oil will produce adverse effects such as affecting the accuracy of products and shortening the life of oil seals.

現在解釋一下全電動概念：

All electric and automatic are two different concepts. Please do not mix them up.

Fully automatic refers to the action of a machine controlled by a computer, corresponding to manual operation. The fully electric means that the servo motor is used as the power source, and different servo motors directly drive such actions as mould adjustment, unlocking mode, rotary die, ejection, extrusion, and lifting of the worktable, which correspond to the hydraulic drive.

The whole process is electrical energy - mechanical energy, no hydraulic oil, that is, no hydraulic energy for intermediate conversion, so there is no heat generated by hydraulic oil friction.

Moreover, because the servo motor output power according to the production state, such as: the longest cooling process occupies the longest cycle, the servo motor has no power output; when extruding, only the motor which controls the extrusion is operated, and the other motors do not make any output.

Therefore, all electric shoe soles will not generate useless work due to idle motor.

To sum up, all electric soles are powered by hydraulic energy conversion and variable energy output, so as to achieve the effect of energy saving.