Revealing The Production Process Of Fur Clothing (Picture And Text)

The production process of fur clothing

Fur, one of the most practical and luxurious living things.

Since ancient times, human beings have been wearing fur in various forms and ways to pursue the warmth and softness brought by fur and become necessities for life.

At present, most of the fur in the world is mink and foxes raised by farms. Farmers and hunters adhere to the most stringent feeding standards and the most humane hunting standards to ensure that consumers everywhere use their fur in accordance with their acceptability and moral standards.

Fur clothing production process

After harvesting fur raw materials, these raw materials will be sent to North American fur auction houses for ratings and sales.

Experienced seasoned inspecting staff will carefully inspect fur size, color and texture.

Similar fur will be bundled together and auctioned and sold by auction houses.

The raw materials for fur purchased will be pported to a tanning factory according to the designer's requirements and processed.

Once the process is finished, the fur is sent to the manufacturer for ingredients and making.

Fur clothing production process

The process of batching is a very important step in the production of the entire garment.

The auction house categorized the fur with similar color and texture, but an experienced batching teacher had to match the fur length, texture and other similar fur to produce a distinctive fur garment.

In the process of producing fur, the quality is also very important.

The better the quality, the easier it is to produce and wear better.

Fur clothing production process

First of all, the designer determines the fur needed, and then the batching division combines the design into a separate fur combination to form a unique pattern.

He will carefully examine the length and texture of the fuzz, as well as the color and characteristics.

In the process of tanning, designers will outline their ideas and colors in the form of design drawings.

The selected design will be formally painted on a drawing, followed by a canvas model, and finally a fur garment.

Rough canvas models will be carefully checked for their fit and overall effect.

Then we will make careful design changes on the drawings. Next, we are going to make fur garments.

The process of making fur clothing

Fur and other clothing raw materials are very different.

Fur is more elastic.

The technology of sewing fur is very similar to that of sewing twill Serge cloth, and no seam can be found.

This means that all fur materials must be tailored very accurately.

In addition, fur is not the most flexible garment material. Designers must take this into account when designing.

Therefore, a certain amount of fur fabric must be added to the sleeves, sleeves, and back.

And designers should also consider that fur will be affected by different technologies, colors and different fur at the same time. After dyeing, laser processing and printing special patterns, fur will be affected.

And when designing double faced fur clothing, this requirement is stricter, because this design does not use lining.

At this point, the designer must take into account the effect of the two sides of the garment, and then how to design the position of the seam, pocket and button.

At this time, some traditional technologies, such as knives and so on, are not suitable for use here, or they need extra time and energy to consider how to properly place each fur.

All of these will affect the production cost of a garment, but also increase the difficulty of the production process.

But at the same time, it also highlights the designer's creativity.

Fur clothing production process

Once the designer has determined the design and the technology to be used, the design will be carefully copied to the paper and then tiled onto the template table.

Here, the template process will be completed, and the fur will be fixed on the template and then cut.

Even 1/8 inches of error can cause a garment to hang up.

Therefore, the accuracy of cutting must be ensured.

After careful ingredients, the fur of each part of the garment was selected, and the fur was carefully soaked and placed on the template table.

The template designer keeps the clothing in accordance with the design pattern and ensures that the whole garment can be stretched at a reasonable strength.

The final stage of work is mainly for finishing the entire dress.

The silk lining has been cut and then stitched to the garment.

So, linings, shoulder pads, pockets, and of course, the lining is sewn to the clothes through a relatively concealed thread.

Clothing was then worn on a model model for thorough examination.

Once the clothes are perfect, the clothes will be cleaned and polished to remove the loose hair.

At this stage, a garment is completed.

Six experienced personnel, including technicians, designers, ingredients, tailors, templates, and reagents, participated in the production process.

The above is the basic production process of a garment. In fact, there will be many changes in the real production process, and additional technicians and techniques are needed.

What's showing is a mink costume.

All kinds of fur require different technology and experience to produce garments.

This is why fur is considered to be a craft and art.