Basketball Shoes Maintenance

Basketball shoes maintenance

The purpose of basketball shoes maintenance is two: one is the maintenance of performance, the two is the maintenance of appearance.

The maintenance method of performance mainly depends on the correct preservation of shoes, while the appearance maintenance is mainly reflected in the scientific cleaning of shoes, and sometimes the two are integrated.

In terms of preservation methods, there are many kinds of raw materials for basketball shoes. For example, the materials used on a pair of basketball shoes are likely to include leather, cloth, nylon, non dragon, trace rubber and so on, resulting in more complicated production processes and more glue bonding.

It is these materials that ensure the performance of a pair of shoes. To maintain performance is to properly handle a pair of shoes, so that the materials mentioned above will not be worn out.

Therefore, we should pay attention to the correct preservation of writing methods.

First, the shoes should be placed in a dry and ventilated place to avoid direct sunlight, because the humid environment will cause the corruption of the shoe body. The exposure to sunlight will cause some of the shoes to deteriorate and discolor.

But shoes should not be too dry because of the cracking of leather.

Because the humid environment will cause the deterioration of the shoe body, sun exposure will cause some of the shoes to deteriorate.

Second, when you save shoes, you should put soft paper balls into your shoes. The purpose of this paper is to absorb the residual moisture inside the shoes to keep them dry, and to keep the shape of the shoes fixed and not to "break down" after use.

Third, the special need to put forward is that for the preservation of collection, it is best to buy some shrink films, like shoes store, like a pair of shoes completely wrapped in order to obtain shoes to a large extent with the air isolation, to prevent the longer period of time the air on the shoes of continuous oxidation.

For example, the visible air cushion of Nike, such as max air or Jordan's 11 and 16 generation outcrops will gradually become yellow in a matter of years. Using shrinkage film to maintain the original color is a good choice.

In terms of cleaning.

Different methods should be applied to different materials.

The shoe's outsole and side non Dragon material parts can be sprayed with a little collar net. After a few seconds, the soft toothbrush is gently brushed. But the time should not be too long. After washing, the foam should be washed away with warm water or cold water, so as to minimize the time of chemicals attacking the shoes.

After cleaning, wipe the residual water with dry rag immediately. If the cleaned shoes are visible air cushion, wipe the water around the air cushion after the above process is finished, so as to avoid some chemical changes that cause the glue to decompose.

If possible, use toothpicks to remove small stones from the sole of the shoe during the walking process, because long time clamping the foreign body will cause the deformation of the sole texture, and to a certain extent, will affect the brake performance of the shoe.

The way to wash shoes is to see what the main material is.

The basic method of cleaning is to wipe up a little bit of water with a cloth, then gently wipe it on the upper, and pay attention to whether the stolen goods on the vamp are "hard". If the shoe is cracked, it will skip the injured area, because if rubbed in the injured area, the wound will become dirtier or even bigger.

If the vamp is similar to Nike's foamposite, Adidas in the the Kobe series PU material or lacquer, directly wipe with a wet cloth can be, is a relatively easy to clean up a material.

And notice that some parts use another kind of artificial leather similar to anti fur material, such as and1 Taichi mid's inner dark part, air Jordan 7 Black vamp. When cleaning, we must pay attention to the moistness of the cloth. Generally speaking, cleaning up this kind of vamp, using too wet cloth will stain the dirty.

However, the above methods are not effective for the shoes, such as part of the nike air Garnett III shoe, which can be said that there is basically no cleaning method for this shoe upper.

In addition, if possible, the shoelace should be removed from the shoes for a period of time to concentrate on cleaning.

Finally, in the aspect of shoes, try to avoid the use of shoes under abnormal conditions, that is to reduce the number of times used on high temperature asphalt roads on rainy days, snowy days and under the sun.

In the case of normal wear and tear, it is necessary to improve the frequency of changing shoes, so that shoes can be rested after being used, and try to revert to a "healthy" state before the next use.

Once the shoes are dirty, they should be cleaned up as soon as possible, so as to avoid the appearance of shoe surface deterioration caused by stains for a long time on shoes. Moreover, it will increase the difficulty of cleaning up for a long time without cleaning up.

In short, the maintenance of basketball shoes is a need for careful process.