Home >

Jeans Actually Carry Out The Standard Of Western Trousers, Shenyang More Than 70% Clothes Failed.

2008/7/23 16:25:00 60

??? 日本語 Fran?ais English 中文

Jeans Actually Carry Out The Standard Of Western Trousers Shenyang More Than 70% Clothes Failed.

The Shenyang quality and Technology Supervision Bureau announced the results of the two quarter product quality supervision and spot check. The spot checks were 16 kinds of industrial products, such as adhesives, fertilizers, pesticides, etc., for interior decoration and decoration materials in Shenyang.

Among them, pesticides, concrete, interior wall coatings, fitted glasses, building reinforcement, paint, water supply and drainage pipe pass rate of 100%.

But wooden doors, clothing and other products pass rate of only 27% to 70%.

60 batches of flooring on the floor were tested on the impregnated paper laminated wood flooring, and 3 batches failed. The pass rate was 95%. The main reason was the wear resistance of the surface, and even the products of some enterprises were less than 1000, which seriously affected the interests of consumers.

Ethanol gasoline vehicle ethanol gasoline was selected for 60 batches, with a pass rate of 96%, which was 36% higher than that of 60% in 2007.

The main products of the decoration and decoration materials for the supervision and inspection of interior decoration materials are latex rubber, all-purpose adhesive and 4115 building adhesive.

A total of 20 batches of products were selected. After testing, the contents of benzene, toluene, xylene and total volatile organic substances were all qualified. The free formaldehyde content of the 1 batches of products exceeded the standard, which did not meet the national standard requirements, and the qualified rate was 95%.

A total of 20 batches of wood-based panels were inspected, with a pass rate of 17 batches, with a pass rate of 85%.

Among them, 7 batches of veneer veneer panels were selected and 4 batches were qualified, with a pass rate of 57%.

The main problem of veneer veneer panels is the excessive formaldehyde emission.

The radiator inspected 20 batches of heating radiator, 2 batches of products failed, and the pass rate was 90%.

The main reason for the unqualified products is that the radiator wall thickness affects the heat dissipation and does not meet the standard requirements.

Furniture furniture formaldehyde emission test pass rate is still low, spot checks 90 batches of products qualified only 66 batches.

The main reason is that some small furniture factories do not pay attention to the quality of products in the purchase of raw materials, and can not effectively carry out formaldehyde detection and control, resulting in excessive formaldehyde emission.

A total of 10 batches of wood doors were selected and 7 batches were qualified, with a pass rate of 70%.

The main reason for the failure is that the product has no instruction manual.

Clothing has been selected for 11 batches of clothing, qualified 3 batches, product sampling pass rate is only 27%.

The main problem is not strictly implementing the national mandatory standards.

There are no labels, manufacturers' names and addresses in the clothing instructions of individual enterprises, and the product names are not standardized.

No washing method is identified, individual enterprises carry out invalid standards, perform standard errors, such as jeans execute men's and women's trousers standard, and products do not have product quality grade.

For unqualified enterprises, it will be required to stop production and sale immediately, and find out the reasons for rectification immediately, and accept the punishment of the technical supervision department according to law.